This article lists the main ‘Elastix HowTo’ articles that will get you started with an Asterisk appliance based on Elastix 1.5.2-2. These ‘HowTos’ are based on my experiences in setting up my own system.It is assumed that you have some of the necessary basic skills needed to performt the tasks required. It is beyound the scope of this document to teach those skills listed below:
- Download software files
- Burn CDs from ISO images
- Install hardware into a PC
- Use PuTTY
- Use a web browser
- Understand IP settings
- Configure your router
- Understand the basic concepts of telephones and IP communications in general
The following articles will guide you through (if there is no link available for a topic, it means I haven’t written it yet, but plan to):
- Installing Elastix -> Read the on site documentation, including the ‘Elastix without Tears’ or here are some basic instructions.
- First connection to Elastix.
- Securing Elastix (Partialy written).
- Installing TDM400 card.
- Getting BT CLI working with DAHDI.
- Installing Webmin onto the Elastix server.
- Updating Elastix and CentOS system via YUM.
Related posts:
- HowTo: Securing Elastix This article covers the initial steps in securing the default...
- HowTo: Elastix – Initial install After a little bit of investigation, mainly on the facilities...
- HowTo: Installing Webmin onto an Elastix server This short HowTo details the steps needed to install ‘Webmin’...
- HowTo: Entering the FreePBX Console from Elastix Console Last Updated: 23 September 2009 This article describes how to...
- HowTo: Connecting a Grandstream to Elastix Last Updated: 03 October 2009 Originally Created: 03 October 2009...
Recent Comments